Enzymes in IGCSE Biology 0610: Temperature, pH and Exam Questions
A clear guide to enzymes in IGCSE Biology 0610: how the active site works, how temperature and pH affect activity, a worked example and practice questions.
For IGCSE Biology enzymes questions, you need to know that enzymes are proteins that act as biological catalysts. They speed up metabolic reactions without being changed by them. Each enzyme has an active site with a shape that is complementary to its substrate. Up to the optimum temperature, a rise in temperature speeds up the reaction because molecules have more kinetic energy and collide more often. Above the optimum, and at a pH far from the optimum, the enzyme denatures. Its active site changes shape, so the substrate no longer fits. In the 0610 syllabus, this is topic 5, and the Extended (supplement) content asks you to explain these effects in more detail.
Key takeaways
-
An enzyme is a protein that acts as a biological catalyst. It is not used up or changed by the reaction.
-
The active site's shape is complementary to the substrate. This is why each enzyme works on only one substrate (specificity).
-
Below the optimum temperature, raising the temperature increases kinetic energy and the frequency of effective collisions.
-
Above the optimum, the active site changes shape and the enzyme denatures. Denaturation is permanent.
-
pH far from the optimum also changes the active site's shape, so the substrate no longer fits.
-
Never write that enzymes are "killed". They are molecules, not living things.
What does the IGCSE Biology 0610 syllabus say about enzymes?
Enzymes are topic 5 in the Cambridge IGCSE Biology 0610 syllabus for exams in 2026, 2027 and 2028. The content is split into Core, which every candidate needs, and Supplement, which is only tested on the Extended papers.
|
Level |
What you need to do |
|---|---|
|
Core |
Describe a catalyst and describe enzymes as proteins that act as biological catalysts in all metabolic reactions. |
|
Core |
Describe why enzymes matter: without them, reactions in cells would be far too slow to sustain life. |
|
Core |
Describe enzyme action in terms of the active site's shape being complementary to its substrate, and the formation of products. |
|
Core |
Investigate and describe how temperature and pH affect enzyme activity, including optimum temperature and denaturation. |
|
Supplement |
Explain enzyme action using the terms active site, enzyme-substrate complex, substrate and product. |
|
Supplement |
Explain specificity in terms of the complementary shape and fit of the active site with the substrate. |
|
Supplement |
Explain the effect of temperature in terms of kinetic energy, shape and fit, frequency of effective collisions and denaturation. |
|
Supplement |
Explain the effect of pH in terms of shape and fit and denaturation. |
The difference between "describe" and "explain" matters. A Core answer can say what happens: "the rate increases up to 40 °C, then falls". An Extended answer has to say why, using the key terms from the table.
What is an enzyme and why do living things need them?
A catalyst is a substance that increases the rate of a chemical reaction and is not changed by the reaction. Enzymes are proteins that do this job inside living organisms, so they are called biological catalysts.
Every metabolic reaction in a cell is controlled by an enzyme. That includes reactions that build molecules up, like making proteins from amino acids, and reactions that break them down, like digesting starch into simple sugars. Without enzymes, these reactions would happen so slowly at body temperature that cells couldn't survive. That is the point the syllabus wants you to make when it asks why enzymes are important: they give reaction rates high enough to sustain life.
Because an enzyme is not used up, one enzyme molecule can catalyse the same reaction again and again. That is why cells only need small amounts of each enzyme.
How do enzymes work? The active site explained
Every enzyme has a region called the active site. Its shape is complementary to the shape of one particular substrate, the molecule the enzyme acts on. You can think of it like a key and a lock: only the right key fits.
Here is the sequence, in the terms examiners look for:
-
The substrate collides with the enzyme and fits into the active site.
-
An enzyme-substrate complex forms.
-
The reaction happens and the substrate is converted into products.
-
The products leave the active site. The enzyme is unchanged and can be used again.
Specificity follows from this. Because the active site has a complementary shape to one substrate, other molecules don't fit. Amylase breaks down starch, but it can't break down proteins, because protein molecules don't fit amylase's active site.
Which words do you need in an enzyme answer?
For Extended papers, aim to use these terms correctly: active site, substrate, complementary shape, enzyme-substrate complex, product, kinetic energy, effective collisions, denatured. Mark schemes often give a mark for each idea, so leaving out one term can cost a mark even if the rest of your answer is right.
How does temperature affect enzyme activity?
Picture a graph with temperature on the x-axis and rate of reaction on the y-axis. The curve rises gradually, peaks at the optimum temperature, then drops steeply. For many human enzymes the optimum is close to body temperature, around 37 °C, but enzymes from other organisms can have very different optimums.
Below the optimum
As temperature rises, enzyme and substrate molecules gain kinetic energy. They move faster and collide more often. More collisions with enough energy and the right orientation means more enzyme-substrate complexes form each second. These are the effective collisions. So the rate increases.
At low temperatures, the enzyme is not damaged. It is just slow, because collisions are less frequent. Warm it back up and the rate recovers.
At the optimum
This is the temperature at which the rate is highest. Molecules have plenty of kinetic energy and the active site still has its normal shape.
Above the optimum
Now the extra energy starts to break the bonds that hold the enzyme's structure together. The active site changes shape. The substrate no longer fits, so fewer enzyme-substrate complexes form and the rate falls quickly. When the shape has changed so much that the substrate can't fit at all, the enzyme is denatured. Denaturation is permanent. Cooling the enzyme down again won't restore its shape.
|
Temperature range |
What happens |
Effect on rate |
|---|---|---|
|
Low (for example 5 °C) |
Little kinetic energy, few effective collisions. Enzyme not damaged. |
Slow |
|
Rising towards optimum |
More kinetic energy, more frequent effective collisions, more enzyme-substrate complexes. |
Increases |
|
Optimum |
Highest rate. Active site still the right shape. |
Maximum |
|
Above optimum |
Active site changes shape. Substrate no longer fits. Enzyme denatures. |
Falls steeply |
How does pH affect enzyme activity?
Each enzyme also has an optimum pH. A graph of rate against pH usually has a peak at the optimum and falls on both sides. A pH too far either side of the optimum changes the shape of the active site. The substrate no longer fits, fewer enzyme-substrate complexes form, and the enzyme can become denatured.
Different enzymes have different optimums, which match where they work in the body. For example, the protease in the stomach works best in acidic conditions, while enzymes in the small intestine work best in slightly alkaline conditions. You may be given a graph with the optimum pH marked and asked to read it off, so check the axis scale carefully.
Notice that pH has no kinetic energy part in the explanation. The only idea you need for pH is shape and fit, leading to denaturation. Students often lose marks by mixing up the two explanations.
How do you investigate enzyme activity in the lab?
The syllabus asks you to investigate the effect of temperature and pH. A common method uses amylase and starch.
-
Put drops of iodine solution into the wells of a spotting tile.
-
Warm separate tubes of starch solution and amylase solution in a water bath at the test temperature for a few minutes.
-
Mix them and start a timer.
-
Every 30 seconds, add a drop of the mixture to a fresh well of iodine. Iodine turns blue-black with starch and stays orange-brown when no starch is left.
-
Record the time when the iodine first stays orange-brown. That is when all the starch has been broken down.
-
Repeat at other temperatures. To test pH, keep the temperature fixed and add buffer solutions of different pH instead.
The independent variable is temperature (or pH). The dependent variable is the time for the starch to disappear. Control variables include the volume and concentration of starch and amylase, and the pH (when testing temperature). Repeat each temperature and calculate a mean to make the results more reliable.
Worked example: calculating a rate from enzyme results
A student tested amylase at five temperatures. These are original practice results, not from a past paper.
|
Temperature / °C |
Time for starch to disappear / s |
Relative rate (1000 ÷ time) |
|---|---|---|
|
20 |
300 |
3.3 |
|
30 |
150 |
6.7 |
|
40 |
90 |
11.1 |
|
50 |
180 |
5.6 |
|
60 |
starch still present after 600 s |
no measurable rate |
Step 1: Rate is inversely related to time. A shorter time means a faster rate, so we use rate = 1 ÷ time. Multiplying by 1000 just makes the numbers easier to plot. At 40 °C: 1000 ÷ 90 = 11.1.
Step 2: Describe the trend. From 20 °C to 40 °C, the rate increases. Above 40 °C, it decreases. At 60 °C, no reaction was detected.
Step 3: Explain it. From 20 °C to 40 °C, the molecules gain kinetic energy, so there are more frequent effective collisions and more enzyme-substrate complexes form. Above 40 °C, the active site changes shape, the starch no longer fits, and by 60 °C the amylase is denatured.
Step 4: Evaluate. The optimum is somewhere around 40 °C, but the real optimum could be anywhere between 30 °C and 50 °C. To find it more precisely, the student should test more temperatures in that range, such as 35 °C and 45 °C.
Practice questions on IGCSE Biology enzymes
These are original questions written for practice. Try them before you read the answers.
Question 1 (Core, 2 marks)
State two features of an enzyme.
Answer: Any two from: it is a protein; it is a biological catalyst; it speeds up a reaction; it is not changed by the reaction; it has an active site.
Question 2 (Extended, 3 marks)
Explain why a protease cannot digest starch.
Answer: The protease's active site has a specific shape (1). It is complementary to protein molecules, not starch (1). Starch can't fit the active site, so no enzyme-substrate complex forms (1).
Question 3 (Extended, 4 marks)
A lipase from a fish that lives in cold water has an optimum of 15 °C. Explain what happens to its activity as the temperature rises from 5 °C to 35 °C.
Answer: From 5 °C to 15 °C, the molecules gain kinetic energy (1), so there are more frequent effective collisions and more enzyme-substrate complexes form, and the rate increases (1). Above 15 °C, the active site changes shape and the substrate no longer fits (1). The rate falls, and at higher temperatures the enzyme is denatured (1).
Question 4 (Core, 2 marks)
A student says the enzyme "died" at 70 °C. Correct this statement.
Answer: Enzymes are not living, so they can't die (1). The enzyme was denatured: its active site changed shape and the substrate no longer fits (1).
What are the most common mistakes in enzyme questions?
-
Writing "killed" or "died". Enzymes are protein molecules. Use "denatured".
-
Saying enzymes denature at low temperatures. They don't. They slow down because molecules have less kinetic energy, and they recover when warmed.
-
Using "same shape" instead of "complementary shape". The active site isn't the same shape as the substrate. It fits around it.
-
Using kinetic energy to explain pH. pH changes the active site's shape. It has nothing to do with how fast the molecules move.
-
Describing a graph but not explaining it. On Extended papers, "explain" needs the reasons, not just the trend.
-
Forgetting to quote data. If you have a graph or table, use numbers from it, for example "the rate peaked at 40 °C".
How do enzymes link to other IGCSE Biology topics?
Enzymes come up again in several other topics. In photosynthesis, temperature is a limiting factor because the reaction is controlled by enzymes. Our guide to photosynthesis in IGCSE Biology shows how the same "rise then sharp fall" pattern appears on limiting-factor graphs. Digestion depends on amylase, protease and lipase, and respiration is a series of enzyme-controlled reactions. Learning the enzyme explanation well pays off across the whole paper.
When you're ready for more mixed practice, past paper questions on enzymes appear in both the multiple choice and the theory papers. Our post on the benefits of IGCSE past papers explains how to use them topic by topic.
Frequently asked questions
What is the optimum temperature for enzymes?
It depends on the enzyme. Many human enzymes work best close to body temperature, around 37 °C. Enzymes from organisms living in cold or very hot places have different optimums. In an exam, always read the optimum from the graph you are given.
Can a denatured enzyme work again?
No. Denaturation permanently changes the shape of the active site, so the substrate can never fit again. An enzyme slowed by cold is different. It is not denatured and works again when warmed.
What is the difference between Core and Extended enzymes content?
Core asks you to describe enzyme action, specificity and the effects of temperature and pH. Extended asks you to explain them using terms like enzyme-substrate complex, kinetic energy, effective collisions and shape and fit.
Is "lock and key" the right term to use?
It is a helpful picture, but the syllabus wording is that the active site is complementary in shape to the substrate. Use "complementary shape" in your answers, and add "lock and key" only as an extra if you want to.
Why does the rate fall faster above the optimum than it rises below it?
Below the optimum, the rate rises gradually as kinetic energy increases. Above it, the active sites change shape quickly, and more and more enzyme molecules become denatured, so the rate drops sharply.
Practise enzymes questions with sortmyprep
The fastest way to make this topic stick is to answer real exam-style questions and check them against the mark scheme. The free sortmyprep plan gives you 5 years of topic-by-topic past papers with mark schemes for IGCSE Biology, and sorty, the AI tutor, can explain any answer you get wrong. Create your free sortmyprep account and start on enzymes today.